Micro-Air EasyTouch™ Control Display (6-Pin) ASY-589-X02

Micro-Air EasyTouch™ Control Display (6-Pin) Most Advanced Marine Cabin Control Display in the World

This special 6-pin interface model is designed to work with the A-281C, A-288D, MAQ, and equivalent OEM control boards. It automatically detects legacy Cruisair® SMX and Q-Logic Control Boards making it a plug and play upgrade for your boat air conditioner thermostat. 

The EasyTouch Display Control is Micro-Air's newest display control, and it employs the very latest microcontroller and TFT LCD technology. It has a user-friendly, 2.5" color, touch screen and is designed for use with direct expansion, reverse-cycle air conditioning systems or with chilled-water air handlers. EasyTouch has numerous unique features previously unavailable in any other control display in the marine HVAC industry.

Features: 

• Advanced system status screen and 500-entry, time-stamped fault history log
• Supports loading a custom image for display during sleep mode (requires special USB cable & PC software)
• Adjustable display brightness, color schemes, and customizable sleep screen logo
• Unique keypad PIN lock, commission procedure, and cleaning mode features
• User-friendly and intuitive 2.5” touch screen display requires no manual for basic operation
• Provides all operational features and modes of any cabin control in the industry, plus many more
• Fits Vimar® Eikon and Eikon EVO bezels (NOTE: Bezel is not included and can be ordered separately at this link)
• 6-pin RJ-12 display interface
• Numerous programmable parameters and system for custom installations
• Date/Time Clock for use with Program Scheduler (w/ battery backup)
• Works automatically via auto-detection with A-281, A-288, MAQ, and equivalent OEM control board

Notes: 

• Compatible with and automatically detects legacy Cruisair® SMX and Q-Logic Control Boards
• Utilizes existing 6-pin display cable for each swap-in replacement and upgrade
• Supports CAN Bus Networking (with additional hardware) to connect to Crestron or other Audio-Visual control system
• Supports both DX equipment and TW Air Handlers

Mounting the Display: 

• Choose a wall location that has adequate depth (at least 1"/24.4mm) behind the wall itself. 

• Make the cutout for the display panel as shown the figure below. Cut-out size is 2.900" (74mm) wide by 2.165" (55mm) Tall. 

• Plug one end of the display cable (6-pin connector) into the display jack on the circuit board of your marine air conditioner electric box and the other end on the back of the ASY-589-X02 display. 
• Secure the display to the bulkhead using the provided screws. Do not use a screw gun and do not over tighten the screws since it might damage the display. 
• Once the display has been securely mounted, mount the bezel over the display carefully until it snaps into place. 

Compatible with the following boards: 

• MAQ or Cruisair Q-Logic Board
• Dometic A-288D (SMXII) Control Board  or ASY-509-X01
• Dometic A-281C Control Board or ASY-555-X0A
• Dometic U-Board or 501-09-BL
• CXP Cables or SUB-CXP-X07

Resources: 

• Operation Manual