EasyStart™ 368 Soft Starter for AC Units 19K to 42K 230V - ASY-368-X48 Blue
EasyStart by Micro-Air is the most effective way to reduce current draw of marine air conditioners or refrigerators. It was designed with a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. It is compatible with all boat air conditioning brands like Dometic, Webasto, Cruisair, Marine Air, etc. EasyStart can deliver a start current reduction of up to 75% of a compressor's LRA (locked-rotor amperage) allowing your marine air conditioner to work in situations where it otherwise would not have functioned.
Sart-Up Algorithm for Start Surge Reduction
- Lab tested CE Compliance
- Average start surge reduction to 65%
- Sophisticated, auto-learned 4-part start-up algorithm
- one time learning algorithm for better shore power/generator transitions.
- Individually optimized profiles for 50Hz and 60Hz
- Low sensitivity to momentary voltage deeps during start-up
- Auto-bleed of run cap voltage and compressor energy during shutdown
- Reliably starts any 115V compressor on a Honda EU2000i in ECO Mode.
Great product, recommend if you have a backup Generator.
I purchased the Easy Start 368 for my 3.5 Ton Carrier. Unit was easy to install. My neighborhood loses power frequently so we purchased a generator, but in 100+ degree Texas heat, running the AC is a must. Older versions come with a 28" harness but luckily the one I received was the 40" so I had plenty of length to install on the wall and feed into the condenser panel. I had to watch a YouTube video to confirm I installed correctly since my wires were not the same color. Cut my LRA to about 1/2 of what it used to be. Bluetooth only works when unit is on, but wish it could have a dedicated power connection to be able to read stats anytime. I ordered the installation kit as well which made things simpler, especially since I didn't have to buy a lot of crimped connectors, plus it comes with an additional cable gland connector to run on the AC side. The PG cable glands are not easy to find locally so the installation kit makes sense. I installed in an outdoor weatherproof box and used a grommet for the cable pass through. Great product. Note: For those with Current monitoring systems, your AC electrical signature will not be recognized immediately after installation.
I am glad to buy an EASYSTART 368 from Water Yacht Solutions. The shipping was fast with good packaging. It was easy installation and the compressor start current reduced by half.
Easy installation, reduced my compressor start current by more than half.
Saw a reduction from 88a inrush to 26a inrush. Wow!!!!
Easy start is the real deal. Does everything it says it does in the product description. Also easy installation.
It shipped really fast and is the exact item I ordered. They had the best price I could find also and it was in stock while other retailers were out of stock.
Works better than advertised and is. Snap to install no issues!
No more "clunk" when the compressor starts. The install was pretty straight forward for my unit (after studying actual wiring and diagrams on Micro-air's webpage). This is supposed to extend the life of the compressor parts - Why don't manufacturers build these into new units already?