MTCGX48-2361 Dometic TITAN Modular Chiller , R410A 260161070 / 9108917779
Features
- Ideal as drop-in replacements for Dometic MTC R-407C units
- Hot-gas bypass valve maintains heating performance in cold seawater
- Up to six modules can be multiplexed for larger capacities
- Thermal expansion valves optimize performance
- Integrated loop-water strainer and flow switch
- Wire harness with polarized plug for easy electrical connections
- 72,000 BTU/h
5-year warranty.
First year parts and labor, second year parts only. Third through fifth years, parts-only warranty against, Erosion/Corrosion on Heat Exchanger resulting in a breach of cooling water into refrigerant circuit. All damaged refrigerant parts will be supplied for replacement.
2 WHAT’S NOT COVERED
What does this Limited Warranty not cover?
This Warranty Shall Not Apply to:
1. Failures resulting from improper or faulty installation, installation that does not comply with Dometic’s
instructions or otherwise, installation that does not comply with any American Boat and Yacht Council
(“ABYC”) standards, and any damage resulting from such.
2. Failures resulting from abuse, misuse, accident, fire, submergence, improper application or use contrary to
instructions.
3. Failures resulting from lack of regular preventative maintenance as outlined within the Operator’s Manual
specific to your Dometic product.
4. Any Dometic product, which has been altered so as to impair its original characteristics.
5. Items not manufactured by Dometic.
6. Dometic products used by or applied by the owner as an integral part of products not manufactured by
Dometic.
7. Additional labor charges associated with the removal, reinstallation, or replacement of any equipment or
furnishings beyond the particular covered Dometic product. The original installer or OEM is responsible for
the accessibility of the Dometic product.
8. The Servicing Dealer’s travel costs in excess of 1.0 hour.
9. Pumps with cracked heads or pumps that have been run dry, are water damaged or have blown freeze plugs.
10. The following components: pump seals, UV light bulbs, sea strainer elements, cartridge filter elements, sand
& gravel in a multi-media filter, pump packing assemblies, pump valve assemblies, pump crankcase oil, fuses,
valve seals and packings, membrane elements and liquid line filter dryers.
11. Gauge instrument calibration.
12. Exterior corrosion.
13. Water damage, including specifically to the following components: pumps, blowers, logic boards and
displays heads.
14. Logic boards with blown metal-oxide varisters (MOVs) (Power Surge).
15. Incorrect programming of displays.
16. Dirty Condensers and/or Evaporators.
17. Failures due to improper winterization.
18. Dometic product damage as a result of improper return packaging or other freight damage.
19. Replacement of refrigerant with substitute without Dometic preauthorization.
20. Environmental and/or Recovery Fees.
21. Welding and Nitrogen Fees.
Installation and application of Dometic products are not warranted by Dometic because Dometic
has no control or authority over the selection, location, application, or installation of Dometic
