null

Mastervolt Mac Plus 24/12-50 DC-DC Converter 24V Input 50 Amps 12V Output CZone - 81205205

Price: $718.74
No reviews yet Write a Review
SKU:
MAS81205205
UPC:
816882021381
Condition:
New
Shipping:
Calculated at Checkout

Mastervolt Mac Plus 24/12-50 DC-DC Converter 24V Input 50 Amps 12V Output CZone

Model: 81205205

Features: 

  • Fast and safe charging, even during short trips
  • Fanless design for silent operation
  • Suitable for flooded, Gel, AGM and Li-Ion batteries (incl. LiFePO4)
  • Even charges fully depleted batteries
  • Engine run detection protects starter battery
  • Adjustable current limits to meet Euro 5/6 requirements
  • Voltage stabilization protects sensitive equipment, lights and loads
  • Parallel operation to obtain charging capacities well over 100 Amps
  • MasterBus, CZone and NMEA 2000 compatible, for intelligent system monitoring and automation
  • Temperature compensation and voltage sense for an optimal charging result
  • E-Mark/R10 certification for mobile applications
  • Power supply mode offers stable power for sensitive loads
  • Heavy duty connections for easy installation and quick set up via DIP switches

Too often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to your service battery. And, by knowing when the engine is running and providing charge, you can be sure that the Mac Plus will never drain your starter battery.

Get peace of mind, knowing that you’ve got the best on-board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even to completely flat batteries.

A robust design holds up in even the harshest conditions, with battery temperature optimized charging and high-quality aluminum housing to ensure superior protection against dust and water ingress. The power efficient design also allows the Mac Plus to operate silently and without a fan.

With a wide DC input range, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. And it also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.

Parallel configuration of up to ten units will provide over 100 amperes. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.

Analog voltage sense ports are also available to compensate for voltage drop and maintain proper charging.

Compatibility with CZone®, NMEA 2000® and MasterBus delivers truly superior monitoring and control, and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.

Specifications

Specifications battery charger
Battery temperature sensor yes, included
Battery voltage sense Yes
General specifications
Status indicator yes, 3-color LED
Communication protocol MasterBus, CZone & NMEA 2000
Output voltage 10-15 V
Nominal output voltage 12 v
Output voltage stabilization 2 % at extremes of temperatures, load and input
Output voltage ripple (peak peak) max. 1 %
Max. output power 750 W
Nominal output power 710 W
Max. output current 50 A
Output charge current (3-step mode) 50 A
Nominal input voltage 24 V
Input voltage range 19-30 V
Max. input current 30 A
Galvanic isolation no
Voltage limited yes
Efficiency > 95 % (at nom. input voltage, full load); peak 97
Parallel configuration yes
Alarm contact yes, through MasterBus
MasterBus powering no
Engine run signal input yes (active high/active low)
DIP switches yes, for basic setup
Dimensions, hxwxd 10.0 x 6.5 x 2.6 inch
Weight 4.4 lb.
Technical specifications
No-load consumption < 2 mA
Charge characteristic 3-traps+
Battery types flooded, Gel, AGM, spiral, Lithium Ion, traction, user defined
3-Step charge option yes (DIP switch settings)
DC consumption < 5 mA
Connections 3 x M8 terminal for cable diameters of 10-50 mm , (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm (remote on/off, temperature sensor, voltage measurement
Temperature range (ambient temp.) -25 °C to 60 °C; derating > 40
Cooling natural cooling
Protection degree IP23
Protections overload, over temperature, DC short circuit, reversed polarity (fuse)
MasterBus compatible yes