Seakeeper Ride Zinc Anode Kit
Model: 12833SP
The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.
Installation
- Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers.
- Unscrew the two (2) M4-0.7 x 12 mm bolts holding the zinc sacrificial anode.
- Attach the new zinc sacrificial anode using the two (2) M4-0.7 x 12mm bolts and tighten to 20 in-lbs (2.3 N-m).
- Reattach the Blade using the four (4) M8-1.25 x 20mm screws and their washers. Be sure to use thread-locking sealant with an activator/primer when reinstalling hardware. Torque these four (4) bolts to 80 in-lbs (9.0 N-m) in an "X" pattern.
